BOTO GROUP LTD
BOTO MACHINE TODAY'S QUALITY IS THE MARKET FOR TOMORROW
Add to Cart
Environmental Testing Equipment 108L Salt Spray Chamber for Electroplating Salt Spray Test
Introduction:
Salt Spray Tester is used to test the anti-erosion quality of the surface of all materials after the rust-proof of painting, coating, electroplating, anoding and rust-proof of greasing.anti corrosion treatment for a variety of materials, corrosion resistance of their products.
Features
* The whole set is made of imported PVC board, with strong structure, never deformation, and acid and alkali resistance to high temperature and never change
* Automatic/manual water filling system, with automatic/manual water filling function when water level is insufficient, the test is not interrupted, the water level is insufficient warning display.
* Precision glass nozzle fog diffusion evenly, and naturally fall on the test piece, to ensure no crystal salt blocking.
* The control instrument is on the same machine board, easy to operate, and clear at a glance.
* With double overtemperature protection, water level insufficient warning, to ensure safe use.
* Imported temperature controller with manual and automatic control mode, using digital display, PID control, error ±1℃, maximum setting time up to 999hrs.
* Direct steam heating method is adopted in the laboratory, which can increase temperature quickly and evenly and shorten standby time.
* The spray tower is attached with a conical dispersion device, which can guide the fog, adjust the fog amount and evenly fall the fog.
* The pressure drum is heated and humidified according to Henry's law, and provides the humidity required by the laboratory.
* The upper cover of the test tank for large scale machine is automatically opened and closed by pneumatic cylinder, which is easy to operate and safe.
* After the test is completed, it has an automatic defogging device, which can clearly observe the samples in the test room.
* Standard of use: CNS3672,3885,4159,7669,8886/ JIS D-0201,H-8502,H-8610,K-5400,Z-2371/ ISO3768,3769 / ASTM B-117,B-268 / GB-T2423 / GJB150
Customer Support Services
Ø Installation
Ø Training (Training customer employees)
Ø Calibration
Ø Preventative maintenance
Ø Replacement parts
Ø Assistance via phone or internet
Ø On-site diagnosis and repair/online diagnosis and repair
Specifications:
| Model | BT-60 | BT-90 | BT-120 | BT-160 | BT-200 |
| Inner size (cm) | 60x45x40 | 90x60x50 | 120x100x50 | 160x100x50 | 200x100x50 |
| External size(cm) | 107x60x118 | 141x88x128 | 190x130x140 | 230x130x140 | 270x130x140 |
| Inside temp | Brine test method(NSS ACSS)35°C±1°C/Corrosion resistance test method (CASS)50°C±1°C | ||||
| Brine temp | 35°C±1°C 50°C±1°C | ||||
| Test chamber volume | 108L | 270L | 600L | 800L | 1000L |
| Brine chamber volume | 15L | 25L | 40L | 40L | 40L |
| Compressed air pressure | 1.00±0.01kgf/c㎡ | ||||
| Spray volume | 1.0~2.0ml/80cm2/h (Collect at least 16 hours, the average) | ||||
| Test room relative humidity | 85%RH or more | ||||
| PH | 6.5~7.2 3.0~3.2 | ||||
| Spray method |
Programmable spray (including the continuous spray interrupted spray) | ||||
| Power | AC220V1Φ10A | AC220V1Φ15A | AC220V1Φ20A | AC220V1Φ20A | AC220V1Φ30A |
